Swap-Mount Fit Coupon
=====================

What it holds: Checks the dovetail click, release and clearance before you print swappable holders and adapters.

PRINT SETTINGS
  Filament:  PETG
  Walls:     5
  Infill:    35% gyroid
  Orientation: the files are already oriented for printing. Put them on the plate as they load;
               don't rotate them.

FILES AND SUPPORTS
  - DOCK_coupon.stl  (supports: no)
      how it lies on the plate: as laid out, no supports (split to objects in the slicer)

HOW IT MOUNTS
  Test piece: lies flat on the bench, used to check fit before printing the real parts.

HOW IT WORKS
  - Slices: three clearances (0.15 / 0.25 / 0.35 mm). Push the tongue stub through each and keep the one that slides in by hand with no wobble.
  - Receiver and tongue blanks: check the click, the thumb release and the pull-up hold.
  - Spacing gauge: checks the 60 mm twin-tongue spacing.

TEST THE FIT FIRST
  Carts, bars and tape rolls vary a little. Before a long print, print the small fit test from the
  Test pieces section of the site (or this part at low infill) and check it on your own gear.

More holders and the latest versions: https://cart-tools.sdos-placeholder.workers.dev/#swap-mount-fit-coupon

Not affiliated with or endorsed by Magliner, Backstage Equipment, ToughBuilt, Milwaukee, Hollyland, Eartec, Sekonic, Inovativ, Matthews or Manfrotto. Brand names only say what a holder fits.
